AC220V 400 W-750 W CNC драйвер серводвигателя + 1.3N.m 2.5A 60 мм 400 Вт серводвигатель переменного тока + 3 знака после Mete кабель для станка с ЧПУ

AC220V 400 W-750 W CNC драйвер серводвигателя + 1.3N.m 2.5A 60 мм 400 Вт серводвигатель переменного тока + 3 знака после Mete кабель для станка с ЧПУ

Распродажа

Сохранить US $18.4


  • Поставщика
  • Первоначальная ценаUS $368.00piece
  • СохранитьUS $18.4piece5% off
  • Последняя ценаUS $349.60piece
  • ДоставкаБесплатная доставка
  • Оценка продукта5.0(0)
AC220V 400W-750W CNC Servo Motor Driver + 1.3N.m 2.5A 60mm 400W AC Servo Motor + 3 Mete Cable for CNC Milling Lathe Machine 6 Package includes: 1 piece*750W CNC Servo Motor Driver 1 piece*400W AC Servo Motor 1 piece*cable (3 Meter, including power cable, encoder cable, control cable) Servo motor parameter Rated power: 400W Rated rotation: 3000r/min Rated torque: 1.3N.m Maximum torque: 3.8N.m Rated line current: 2.5A Rated line voltage: 220V Rotor inertia (Kg.m2×10-4): 0.26 Coder line number (PPR): 2500 Insulation grade: B Rating: Continuous Ventilation protection: Completely sealed, self cooling Installation mode: Flange(60, 90,110, 130) Over-heating protection:None Place,altitude and atmosphere: Indoor, lower than1000m, no corrosive and inflammable gas, dust and oil mist Ambient temperature and humidity: Environment temperature: -20°C ~+50°C; relative humidity: <90% (no condensing) Driver Parameter 1. AC sine wave control, torque smoothly and without pulsation. 2. 2500 ppr incremental photoelectric encoder, high positioning accuracy, rotary positioning accuracy up 1/10000R. 3. Speed ratio up to 1:5000, from low speed to high speed torque characteristics are stable. 4. High-speed arithmetic processing FPGA, maximum motor speed up to 5000RPM. 5. A rich complete set of parameters that can be configured to run different operating modes, so meet different demand. 6. Position, speed, torque control mode, using widely. 7. Adopt intelligent space vector control algorithm (SVPWM), could produce greater torque and less noise. 8. Up to three times the overload design, with a load capacity greater. 9. Perfect protection: over current, overvoltage, overheating and encoder failure, etc. 10. Perfect condition monitoring functions, such as the position error, motor speed, feedback pulse, command pulse and so on. Input Voltage: AC220V -15%~+10% Driver Current: 10A Matching Motor: 400W-750W Motor Using Temperature: Work:45°C Storage:-40°C~55°C Relative Humidity: 40%~80% with no condensation Atmosphere: 86-106kpa Control Mode: Position control; JOG control; Speed control; Torque control; Position and speed control; Inside pulse control; Electric tool carrier control Pulse Command: Pulse+ Direction; CW + CCW Pulse; Two-phase AB orthogonal pulses Control Precision: 0.01% Response Frequency: ≤200Hz Pulse Frequency: ≤500kHz Speed Ratio: 1:5000 Regenerative Brake: Internally Installed Electronic Gear: 1/30000~30000/1 Overload Capacity: ≤300% Feedback Pulse: 2500p/r, Frequency division can be set arbitrary within 0-128 Display Function: Motor speed, motor current, motor torque, motor position, the position deviation, the number of command pulses, the pulse frequency, the straight-line speed, input and output diagnostic Protection Function: Over speed, over current, overvoltage, under voltage, overload, super bad, encoder fault, the temperature is too high, the internal chip failure, module failure Shipment When you place an order, plase choose a shipping method and pay for the order including the shipping fee (except free shipping). We will send the items within the delivery time once your payment is completed. We will inform you if need to change to other shipping method or delay shipping. We do not guarantee delivery time on all international shipments due to differences in customs clearing times in individual countries, which may affect how quickly your product is inspected. Please note that buyers are responsible for all additional customs fees, brokerage fees, duties, and taxes for importation into your country. These additional fees may be collected at time of delivery. We wiil not refund charges for refused shipments. The shipping cost does not include any import taxes, and buyers are responsible for customs duties. Returns We do our best to serve our customers the best that we can. We will refund you if you return the items within 15 days of your receipt of the items for any reason. However, the buyer should make sure that the items returned are intheir original conditions. If the items are damaged or lost when they are returned, the buyer will be responsible for such damage or loss, and we will not give the buyer a full refund. The buyer should try to file a claim with the logistic company to recover the cost of damage or loss. The buyer will be responsible for the shipping fees to return the items. Warranty We offer the1-month free replacement. Buyers may request for a replacement within 15 days from your receipt of the product. The buyer should return the product in the original conditions to us and should bear the shipping costs for return. We also provide 12-month free maintenance. The buyer should return the product in the original conditions to us and should bear the shipping costs for return. If any part is required to be replaced,the buyer should also pay for the costs of the parts to be replaced. Before returning the items, please confirm the return address and the logistics method with us. After you give the items to the logistic company, please send us the tracking number. As soon as we receive the items, we will repair or exchange them ASAP. Feedback Your satisfaction and positive feedback is very important to us. Please leave feedback and 5 stars if you are satisfied wiht our items and services. If you have any problems with our items or services, please feel free to contact us first before you leave negative feedback. We will do our best to solve any problems and provide you with the best customer services. Распродажа Сохранить US $18.4 и Скидка 5% для AC220V 400 W-750 W CNC драйвер серводвигателя + 1.3N.m 2.5A 60 мм 400 Вт серводвигатель переменного тока + 3 знака после Mete кабель для станка с ЧПУ с Оценка продукта: 5.0 Объем розничных продаж: 0 Последняя цена: US $349.60 Поставщика:

2019 © BLOGGALO.ME, Все права защищены.